When it comes to your boat and its engine, it’s important to choose the right oil and fuel for your needs. Mercury Lubricants is a trusted brand that offers a wide range of products to keep your marine engines running at their best. Check out our listing below for some of our most popular Mercury Lube products at PartsVu. PartsVu is a leading resource of boat parts and accessories.
Mercury lubricants are a common alternative to traditional synthetic engine oils. The use of Mercury lubricants, oils, and additives can help to increase the overall lubricity of your engine. Lubricity is a measure of how slippery an oil or grease is; it’s what allows parts to slide over one another without wearing down or damaging them. In addition, increased lubricity reduces friction between moving parts, which can help keep them cooler and reduce noise levels in your car’s engine as well as prolong its life span by preventing wear and tear on all its critical components.
Mercury Quickleen Engine & Fuel System Cleaner
Mercury Quickleen Engine & Fuel System Cleaner is a powerful cleaner that helps reduce carbon, varnish, and sludge buildup in your engine. It cleans injectors and valves, lubricates fuel system components, and reduces emissions while improving performance.
The cleaner also improves starting performance by removing deposits from spark plugs and igniters before they cause damage to the engine.
Mercury Ringfree Engine Treatment 16oz
Protects against corrosion and reduces friction, wear and improves fuel economy. Provides protection against rust and corrosion that can cause engine damage. Lowers emissions by reducing pollution at the source. Protects against foaming and scum build up in the cylinder walls during prolonged idling periods or high-speed driving; reduces engine noise as well.
Mercury Optimax/DFI 2 Cycle 2-C Fuel Conditioner and Stabilizer
The Mercury Optimax/DFI 2 Cycle 2-C Fuel Conditioner and Stabilizer helps keep your fuel fresh for up to two years. It helps prevent gelling and corrosion, which can cause damage to your engine. This product will also prevent water from entering the fuel system by keeping it clean, allowing you to avoid problems such as plugged lines or filters.
This stabilizer contains no harmful chemicals that could hurt your vehicle or equipment; instead it uses natural compounds like coconut shell ash (which is a plant-based material) in its formulation so that you get maximum benefits without worrying about side effects.
Mercury Factory Blend 2-Cycle Oil 80W90 Gear Lube
This oil is recommended for use in all Mercury outboard engines, stern drives, and inboard engines. It’s also recommended for use on all Mercury marine gearboxes.
Mercury High-Performance 2-Cycle Engine Oil TCW3
Mercury High-Performance 2-Cycle Engine Oil TCW3 is a two-cycle oil that’s designed for use in Briggs & Stratton engines. It contains a high-performance formulation of synthetic base and coolant that provides excellent lubricity, antiwear protection, and resistance to extreme temperatures. This product meets or exceeds the performance standard set by the American Petroleum Institute (API) for its 150°F service temperature rating.
Mercury High-Performance 2-Cycle Engine Oil TCW3 is formulated with an 80W90 gear lube additive package that improves engine wear at high operating speeds while reducing friction losses in gears and bearings. The 100:1 ratio of the synthetic base alone provides excellent oxidation stability in automotive engines while maintaining good film strength at low temperatures—allowing you to enjoy longer engine life at every start-up or stoplight!
Mercury Synthetic Blend 2-Cycle Marine Oil TCW3
Mercury Synthetic Blend 2-Cycle Marine Oil TCW3 is an excellent choice for the following applications:
- Long drain intervals
- Heat and sludge resistance
The TCW3 100:1 ratio provides excellent wear protection, even in extended drain intervals.
Mercury Premium Plus 2-Cycle Outboard Oil TCW3 100:1
TCW3 is a synthetic blend oil designed to protect against wear, corrosion, and foaming while meeting the demands of today’s high-performance outboard engines. TCW3 contains premium additives such as anti-foaming agents and friction modifiers that work together with synthetic base fluid to provide superior performance in all types of marine environments.
This 100:1 blend will help you to maximize your engine’s life through effective lubrication and protection from harmful deposits in its oil pan or crankcase area.
Mercury Outboard XLF Full Synthetic Marine Engine Oil, TCW3 100:1 Ratio
This oil is a synthetic blend designed for use in outboard engines. It’s designed for use in fresh water and salt water, all weather conditions, and all boat sizes. It has a TCW3 100:1 ratio of fully synthetic base oils with a zinc additive package that provides superior corrosion protection against environmental stressors such as saltwater corrosion, oxidation caused by heat or UV rays from the sun, and other contaminants found on the ocean floor environment.
Marine can be a tough environment for any boat part. Make sure your oil and fuel are kept up to date to avoid premature engine wear
