Are you getting no LED on your Netgear router? If you nod in yes, then first of all, we would say, drop all your worries. This issue is because of minor technical issue that can be resolve by following the tips provided in this post. So, keep scrolling down and get fixes to “Netgear router no LED” issue.
Fix: Netgear Router No LED Issue
Fix 1: Restart Your Netgear Router
The easiest way to troubleshoot “Netgear router no LED” issue is to restart or power cycle your Netgear router. Follow the steps provided below in order to initiate and complete the process in a hassle-free way:
Step 1: Disconnect all the connections that you have made between your Netgear router, existing modem, PC, laptop, and your smartphone.
Step 2: Once you are done, power off your Netgear router and wait for some time.
Step 3: Plug your Netgear router back in. Make sure that the wall socket is damage and fluctuation-free.
Now, check the status of the LED on your Netgear router. The LED will become stable shortly upon blinking.
Are you able to troubleshoot the “Netgear router no LED” issue? No? Fret not! Try the next tip provided below.
Fix 2: Perform Netgear Router Firmware Update
Using routerogin.net web address, you can also try updating the firmware of your Netgear device in order to fix the issue. Don’t know how to perform Netgear router firmware update process? No problem! Take the help of the instructions provided below:
Step 1: Turn on your PC or laptop and get access to the router’s WiFi. Ensure that the software of the device is already up-to-date.
Step 2: Navigate to the Netgear router’s official site.
Step 3: Download the latest version of firmware as per the router model you have. Make sure that your device has the enough space to download the router’s firmware version.
Step 4: Open a web browser. Ensure that you are using an up-to-date browser which browsing history must be cleared.
Step 5: Once you are done with step 4, head over to the URL bar and enter 10.0.01 IP without committing any typing errors.
To prevent typos, we suggest you to copy 10.0.01 IP and paste in the browser’s URL bar. Also, do not do the mistake of using the browser’s search bar for tying 10.0.01 IP.
Step 6: Press Enter to get redirected to router’s firmware update page.
Step 7: Follow the provided on-screen prompts and the latest version of firmware will be downloaded shortly on your Netgear router.
Note: Till the Netgear router firmware update process is going on, we suggest you to have patience. DO NOT interrupt the firmware update process by turning off the router, going online, or clicking on any link.
Still No Luck?
Fix 3: Check the Power Supply
If you still cannot get rid of “Netgear router no LED” issue, then consider checking the power being supplied to your router. Make sure that your device is getting a steady power supply. Bear in mind – an uninterrupted or discontinuous power supply is one of the major reasons behind “Netgear router no LED” issue.
Fix 4: Reset and Reconfigure Netgear Router
Are you still struggling with the same issue? No worries! Reset is the only option you are left with. Resetting Netgear router has helped a hundreds of Netgear router users across the world.
Here’s how to reset Netgear router:
Step 1: First thing first, disconnect your Netgear router and modem. Stop accessing router’s WiFi as well.
Step 2: Locate the reset hole on your Netgear router and press it using a oil pin, paper clip, pencil, or a tooth pick.
Step 3: Hold the router’s reset hole and release it.
Your Netgear router resets successfully. Now that you are done with resetting Netgear router, reconfigure it again by navigate to the Netgear Genie setup wizard using 192.168.1.1 IP and following the on-screen prompts in exact given order.
And, with this last tip, our article on how to fix “Netgear router no LED” issue ends here. Anticipating that after implementing the tips mentioned above, you are able to make the most out of your Netgear router. Please share your feedback regarding this piece of writing.
Wishing you a happy experience with Netgear router!